Showing 26–39 of 39 results
-
AIGI 98 is an interbraid Packing using high quality carbon fiber reinforced flexible graphite tape. The extreme temperature resis-
tance, self-lubricated capability and high heat dissipation make AIGI 98 an excellent choice for high temperature and high speed
equipment. The tremendous sealability and strength of the reinforced flexible graphite also make it an excellent choice for valves
in chemical and petrochemical plants and refineries as well as power plants.
More information
-
AIGI 99 is a tight, densely interbraided graphite Packing where each flexible graphite yarn is reinforced with a nickel wire mesh
that improves strength and blowout and extrusion resistance. The dense construction, blowout and extrusion restance and gen-
eral stuffing box conformability of the flexible graphite make AIGI 99 the optimurm packing for sealing high temperature and high
pressure steam as well as a wide range of chemicals.
More information
-
AIGI has taken double split rotary seal design to a new level with the introduction of its patented duo-lock and wedge cutting technologies. These technologies allow for the incorporation of two independent seal surfaces into the design which dramatically improves sealing performance. The duo-lock design improves the overall elasticity of the seal while the wedge cutting technology significantly upgrades the integrity of the split joint. These improvements significantly extend the seal performance, life and range of use for split rotary seals. Locking Mechanism for Outer Ring.
Features & Benefits
- Easy & fast installation
- No equipment disassembly required
- Low friction
- Reduces maintenance time by 80%
More information
-
Application
- High speed equipment (not applicable for vertical equipment or grease bearings)
- Reducers, bearing housing and motors (not applicable for vertical equipment)
Features & Benefits
- Substitute of traditional labyrinth seal Easy installtion & long seal life
- No shaft damage
- Dramatically extends bearing life
- No equipment modification required
- Easy installation
- Automatic alignment
- Safe usage in all plant environments
- Reliable continuous operation
More information
-
AIGI SSSP Packing is braided using a mix of high carbon content carbon fibers and PTFE yarn and then finish lubricated with high
quality graphite. The high temperature resistance strength, self-lubricating properties of high carbon fiber combined with the
flexibility, chemical resistance and stuffing box conformability of PTFE fibers makes AIGI SSSP the optimal choice for slurry appli-
cations in industries such as mining, pulp and paper, metals processing and power.
More information
-
AIGI Compressed Fiber Gasket Sheet is produced using an advanced thermal rolling technology, consisting of aramid fibers and special binders, which makes for a high quality universal material in general gasket applications.
More information
-
Replace all
Spiral Wound Gaskets & Camprofile Gaskets !
Benefits & Advantages
- Internally self-energized and by fluid pressure for better sealing performence
- Interchangeable with all spiral wound gaskets and Camprofile gaskets
- Will not damage flange like Camprofile gaskets and spiral wound gaskets
- Prevents over-compression of sealing element
Standard Materials
- Metal Materials : 304, 304L, 316, 316L, 321
- Non-metallic Sealing Materials : Flexible Graphite, PTFE
*Nuclear Graphite, Mica, Monel, Inconel and other materials are available on request.
More information
-
The Flexaseal Style 85 split cartridge mechanical seal requires just two pieces to be handled for installation. Both sealing faces are safely secured in the cartridge halves and cannot be cocked, chipped or scarred. The Flexaseal 2-piece split cartridge mechanical seal is completely assembled and pressure tested before it is shipped to you.
More information
-
Graphite sheet is made from naturally occurring graphite flakes, after processing the graphite from its mined ore state to purify and expand it, the flakes are calendared into pure graphite sheets with no binders or fillers. With the lack of binders and fillers there is no significant volume loss in gaskets being used at high temperatures and the gaskets will not harden like compressed fibre gaskets containing elastomer binders.
Graphite’s outstanding thermal stability, excellent compressibility and a superior chemical resistance makes it one of the best gasket materials in the sealing industry today, with the only down side being graphite’s less handleability. Due to graphite sheet being a lot more fragile than other gasket materials they must be handled and installed with care.
Features & Benefits
- Low permeability to gases and liquids
- Flexible, soft texture
- Resistant to most mediums
- Asbestos free & No health hazard
- Environmentally compatible
- Suitable to use at temperature ranges from 250°C to 3000°C
- No binders, will not age or harden
- Has long term compressibility and recovery stability
- No cold or warm flow
- Excellent resistance to thermal shock
More information
-
Flexaseal offers replacement seals for a full array of compressors, mixers, pumps, and other rotating equipment. Direct replacements are available in standard inch and metric sizes and materials for major brands, including John Crane®, EagleBurgmann®, Pac Seal™, U.S. Seal Mfg™, and Flygt®. Replacements for custom designs are available on request.
More information
-
Polytetrafluoroethylene PTFE, a fluoropolymer with exceptional chemical resistance and is the most widely used plastic in the sealing industry. The only known chemical products to attack PTFE are liquid alkaline metals and free fluorine. It has a fairly good temperature range from cryogenic to plus 260°C, excellent electrical insulation properties, anti-stick, impact resistance and low coefficient of friction. AIGI Environmental Inc. has a number of reinforced or filled PTFE gasket sheeting products that are suitable for various applications and can be provided in sheet or cut gasket formats.
Features & Benefits
- Chemical resistant PH 0 – 14
- Temperature range -240°C to 260°C
- High residual stress
- Environmentally friendly
- Non aging & UV resistant
- Non flammable & Vacuum resistant
More information
-
AIGI Environmental Inc also has gasket sheet with rubber material such as : Nitrile Rubber (NBR), Fluorubber (FR), Neoprene, Ethylene Propylene Diene Rubber (EPDM), Silicon Rubber.
More information
-
With four (4) configuration options all incorporating additional engineered features such as reverse pressure capability, non-clogging multi-springs, rugged seal drive operation, and hydraulically balanced faces, the RKCS single and RKCD dual seals successfully contend with the industry’s toughest slurry challenges.
More information
-
